2011 Toyota Land Cruiser Suspension Control Arm Kit Parts
Image
Product
Price
- ICON’s tubular steel rear lower link arms are a significant upgrade over factory arms due to increases in strength, adjustability, and performance. They are CNC machined 1026 DOM steel, welded in-house, and feature PTFE-lined FK rod ends.
- 07-UP FJ/03-UP 4RNR/08-UP LC 200/03-UP GX TUBULAR LOWER TRAILING ARM KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- Bushings Included: Yes
- Control Arm Material: Steel
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 07-up Fj/03-up 4rnr/08-up Lc 200/03-up Gx Tubular Lower Trailing Arm Kit
- Control Arm Color: Black
- Bushing Material:
- Polyurethane
- Rod End Bearing
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- Offset lower link front pivots improve roll steer
- Tangent lower link barrel design reduces risk of off-road hangups
- Integrated OEM emergency brake bracket mount
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel rear lower link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability and also utilize a multi durometer bushing that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such as a tangent lower link barrel design that allows for easier sliding over off-road obstacles, and offsetting the front pivots of the lower link for improved roll steer geometry. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Toyota Land Cruiser | Rear Lower |
- 2008-UP LC 200 BILLET UCalifornia DELTA JOINT KIT
- 08-UP LC 200 BILLET UCalifornia DJ KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 34" X 10.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Ball Joint Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys | 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 20x9" W/ 6” Backspace / 25mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushings Included: Yes
- Ball Joint Stud Type: Threaded
- Control Arm Construction:
- Billet
- Tubular
- Grease Fitting Included: Yes
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Title: 08-up Lc 200 Billet Uca Dj Kit
- Bushing Material: Rod End Bearing
- Service Parts: 614519 - Delta Joint Install Press Adapter Tube
- OEM Wheels & Tires Fitment: Yes
-
Features:
- ICON Delta Joint
- CNC Machined 6061 Billet Aluminum Construction
- Quality PTFE-lined ¾” FK Rod Ends
- On-Vehicle Adjustable For Quick And Precise Alignment
- Caster and Camber Adjustability Allows For Fine Tuning Of Vehicle Handling
- Matte Anodized Finish Provides Exceptional Corrosion Resistance
- O-ring Sealed Delta Joint Cover Cap For Additional Protection From The Elements
- These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Toyota Land Cruiser | Front Upper |
- ICON’s tubular steel rear lower link arms are a significant upgrade over factory arms due to increases in strength, adjustability, and performance. They are CNC machined 1026 DOM steel, welded in-house, and feature PTFE-lined FK rod ends.
- 07-UP FJ/03-UP 4RNR/08-UP LC 200/03-UP GX TUBULAR LOWER TRAILING ARM KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- Bushings Included: Yes
- Control Arm Material: Steel
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 07-up Fj/03-up 4rnr/08-up Lc 200/03-up Gx Tubular Lower Trailing Arm Kit
- Control Arm Color: Black
- Bushing Material:
- Polyurethane
- Rod End Bearing
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- Offset lower link front pivots improve roll steer
- Tangent lower link barrel design reduces risk of off-road hangups
- Integrated OEM emergency brake bracket mount
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel rear lower link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability and also utilize a multi durometer bushing that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such as a tangent lower link barrel design that allows for easier sliding over off-road obstacles, and offsetting the front pivots of the lower link for improved roll steer geometry. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Toyota Land Cruiser | Rear Lower |
- 2008-UP LC 200 BILLET UCalifornia DELTA JOINT KIT
- 08-UP LC 200 BILLET UCalifornia DJ KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 34" X 10.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Ball Joint Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5.75” Backspace / 25mm Offset
- Icon Alloys | 18x9" W/ 6” Backspace / 25mm Offset
- Icon Alloys | 20x9" W/ 6” Backspace / 25mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushings Included: Yes
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Billet
- Grease Fitting Included: Yes
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Title: 08-up Lc 200 Billet Uca Dj Kit
- Bushing Material: Rod End Bearing
- Service Parts: 614519 - Delta Joint Install Press Adapter Tube
- OEM Wheels & Tires Fitment: Yes
-
Features:
- ICON Delta Joint
- CNC Machined 6061 Billet Aluminum Construction
- Quality PTFE-lined ¾” FK Rod Ends
- On-Vehicle Adjustable For Quick And Precise Alignment
- Caster and Camber Adjustability Allows For Fine Tuning Of Vehicle Handling
- Matte Anodized Finish Provides Exceptional Corrosion Resistance
- O-ring Sealed Delta Joint Cover Cap For Additional Protection From The Elements
- These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Toyota Land Cruiser | Front Upper |
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 07-UP FJ/03-UP 4RNR/08-UP LC 200/03-UP GX BILLET LOWER TRAILING ARM KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Rod End Bearing
- Bushings Included: Yes
- Control Arm Material: Aluminum
- Control Arm Construction: Billet
- Grease Fitting Included: Yes
- End 2 Type: Bushing
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 07-up Fj/03-up 4rnr/08-up Lc 200/03-up Gx Billet Lower Trailing Arm Kit
- Control Arm Color: Silver
- Bushing Material:
- Polyurethane
- Rod End Bearing
- Service Parts: 614509 - 54000 Bushing And Sleeve Kit
-
Features:
- On vehicle length adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon ROCK Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Greaseable, multi-piece polyurethane bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON's Billet Aluminum Rear Trailing Arms for the Toyota FJ Cruiser, 4Runner, 200 Series Land Cruiser, and Lexus GX are a great replacement for weak factory lower links. These trailing arms are light, strong, and have been engineered to increase the off-road ride quality the vehicle. Constructed out of 6061 CNC-machined billet aluminum, these arms also stand out when bolted up on the vehicle. They include 16T Rod Ends that have a load rating of over 40,000 lbs of pressure as well as a dual rate bushing on the axle side for excellent articulation characteristics with minimal deflection. A replaceable nylon rock slider is incorporated into the design of the arm to prevent any hang-ups on the trail.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Toyota Land Cruiser | Rear Lower |
- ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
- 07-UP FJ/03-UP 4RNR/08-UP LC 200/03-UP GX BILLET LOWER TRAILING ARM KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Rod End Bearing
- Bushings Included: Yes
- Control Arm Material: Aluminum
- Control Arm Construction: Billet
- Grease Fitting Included: Yes
- End 2 Type: Bushing
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 07-up Fj/03-up 4rnr/08-up Lc 200/03-up Gx Billet Lower Trailing Arm Kit
- Control Arm Color: Silver
- Bushing Material:
- Polyurethane
- Rod End Bearing
- Service Parts: 614509 - 54000 Bushing And Sleeve Kit
-
Features:
- On vehicle length adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon ROCK Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Greaseable, multi-piece polyurethane bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- ICON's Billet Aluminum Rear Trailing Arms for the Toyota FJ Cruiser, 4Runner, 200 Series Land Cruiser, and Lexus GX are a great replacement for weak factory lower links. These trailing arms are light, strong, and have been engineered to increase the off-road ride quality the vehicle. Constructed out of 6061 CNC-machined billet aluminum, these arms also stand out when bolted up on the vehicle. They include 16T Rod Ends that have a load rating of over 40,000 lbs of pressure as well as a dual rate bushing on the axle side for excellent articulation characteristics with minimal deflection. A replaceable nylon rock slider is incorporated into the design of the arm to prevent any hang-ups on the trail.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Toyota Land Cruiser | Rear Lower |
Showing 1 - 6 of 6 products
Loading...